The body of the machine and steel structure. The machine 4 attractive cylinder moving gearbox control. The setting of speed inverter with control panel is done. Saw-search measures are fixed , different sizes of business to be done if required, saw between the flanges are replaced. The top of the print rollers movement , manufactured according to the thickness manually. One side of the clean product direction gonyesi used. Complete cylinder system with rubber covered with mdf material does not hurt.

The machine is on a 3-Roller output tape. MDF'den coming out of sawdust according to the demands of the concrete pit or exhaust pipe can be transferred.


Size - En - Height : 2500 - 2000 - 1500 mm

Saw Motor Power : 30 Kw 3000 Rpm

Reductor Engine : 2,2 Kw 110 D/D Output

Saw Diameter : Max.: Ø 250 mm

Saw the Hole Diameter : Ø 70 mm

Cutting Width : Max. : 1000 mm

Cutting Thickness : Max. : 50 mm

Saw Quantity : Max.: 10 Pieces

Cutting Speed : 0+40 m/min

Saw The Transfer Of The : 3000 Rpm

Weight : 1250 Kg



MDFC50 Mechanical System MDF Slicing Machine, max: 50 mm height mdf group of companies working ranges of products designed for a variety of measurement. The inside of the machine is designed to be 1180 mm. Saw shaft with feather key length is 1000 mm. For example, the desired measurement range of 93 cm plate, multi-slicing process is carried out in a way.

Circular saws with diamond cutting process is provided. Saw shafts fixed. 250mm saw blade can be installed. Retention properties of rubber rollers are coated with an attractive MDF material and is provided with gear motor is moving. Movement of the upper pressure roller adjustment process is carried out manually. 1 up to 40 m long used the machine speed rapidity fully engaged in the cutting process. For example, 20 mm high, 2000 mm long, 930 mm wide and is regarded as a MDF properly. 1 hour 20 pcs plate machine is disconnected. The calculation may vary depending on the dimensions.