H.Ç.D.2M. 250 GENERAL FEATURES

Machine body is steel. When it is sticky or hard, to adjust the speed. Through hydromotor, saw blade RPM may be lowered down until (0). Side directional is not used, when it has at least 3 unshaved side. To use directional ruler. There are total 8 cylinders for material puller and pressing cylinder. Upper and lower motions of pressin cylinders are controlled by hydraulic piston.

H.Ç.D.2M. 250 TECHNICAL DIMENSION

Lenght – Width - Height : 4400 x 2400 x 2000 mm

Appr. Wt : 4850 kg

Main Engine Power : 2x100 Hp 3000 D/D

Hydraulic Engine Power : 5,5 Kw 1500 D/D

Saw Blade Diameter : 400 mm

Cutting Thickness : 250 mm

Saw Blade RPM : 3500 D/D

Cutting Breadth : 700 mm

Nr. Of Sawblades : max 20 Ad.

Main Shaft Diameter : 70 mm

Cuttin Speed : 0+15 m/d

PRODUCT VIDEO

H.Ç.D.2M. 250 WORKING PRINCIPLE

H.C.D.2M.250 Hydraulic System Multi-Slicing Machine; max: 250 mm tikness wood group of products in a single transaction, 10 saw attached to the 9 pieces of finished taking action. Cutting diamond circular saws are provided with. Saw shafts sabittir.400mm saw can be installed. Attractive rolls hydraulic motor. The top of the print rolls movement hydraulic setting operation is performed.

Machine speed so full when used in 1 minute 20 m length, cutting process. For example, 250 mm in height at 6000mm length 400mm wide plank properly accepted, 0.6 m3 makes . The machine is a 1-hour cut of 36 m3 cutting of trees can be performed. The calculation of the dimensions may vary.

TOP