H.Ç.D.2M. 160 – AKKUŞLAR MACHINE

H.Ç.D.2M. 160

Hydraulic System Multi-Slicing Machine

H.Ç.D.2M. 160 GENERAL FEATURES

Machinery, the body of the steel construction. Material of hardness, chewing gum and other similar cases, the speed of adjustment Hidromotor through infinitely variable (O) D/D, up from reduced. At least 3 edge clean the finished side of the square is not used ,the destination sakul it is used. The material is attractive and pressure cylinder to 6-cylinder. Pressure cylinder of the landing and takeoff of the hydraulic piston controlled. Multi-saw shaft is fixed. Print and attractive rollers moving hydraulic controlled.

H.Ç.D.2M. 160 TECHNICAL MEASUREMENTS

Size-En-Height : 3000 - 1800 - 1500 mm
Approximate Weight : 2500 KG (Average)
Main Motor Power : 75 KW 3000 rpm
Hydraulic Motor Power : 4 KW, 1400 rpm
Saw Diameter : Max : 450 mm Min : 250 mm
Cutting Thickness : up to 160 mm
Sawing speed : 3400 rpm
Cut the Max Width : 700 mm
Saw quantity : Max : 10
Main Shaft Diameter : Ø 70 mm
Cutting Speed : 0 to+20 m/d
Cylinder Freezer Hidromotor : MR 160
Dimensions : 2850 SPB 6 PIECES
Colors : Ocean Blue

ÜRÜN VİDEOSU

H.Ç.D.2M. 160 WORKING PRINCIPLE

160 mm tichess wood group of products in a single transaction, 10 saw attached to the 9 pieces of finished taking action. Cutting diamond circular saws are provided with. Saw shaft is fixed. Max 450mm saw can be installed. Attractive rolls hydraulic motor. The top of the print rolls movement hydraulic setting operation is performed. Machine speed so full when used in 1 minute 20 m length, cutting process. For example, 125 mm in height at 6000mm length 200mm wide plank properly accepted, 0.3 m3 makes . Machine 1 hour not cutting 18 m3 cutting of trees can be performed. The calculation of the dimensions may vary.

TOP